With °CALEON you can set your desired temperature for your home, office or hotel room at any time – for more comfort and more energy efficiency.
1. Ensure use of suitable cables for the CAN bus connection: » min. 4 wires » Twisted-pair » Shielded The twisting in pairs must be maintained: CAN high & CAN low; 24VDC & GND; Green & Yellow 2. Connect CAN adapter to CAN cable 3. Connect wires according to the indications Make sure that the terminating resistors are set on the first and last device of a CAN bus line! Use the enclosed operating tool to avoid destroying °CALEON’s terminal clamps. 4. Select a room icon during commissioning of the °CALEON 5. Assign a °CALEON Room Controller on the HCC controller under Settings → Heating circuit 1 6. Optionally make further settings Several °CALEON can also be assigned to a heating circuit in the same way If you want the heating circuit to switch off in addition to summer-winter shutdown, even if the room temperature is reached, set “”summer +…
The multiroom feature allows you to view and adjust all the rooms in the system, not only the local room itself. The multiroom feature can also be deactivated under Settings → RoomSync (e.g. in offices or hotels) . To set all rooms to the same operating mode, just swipe down. Since every room can have different target temperatures for each operating mode, no general target temperature can be set. This prevents the unintentional overwriting of carefully balanced setpoint temperatures. Holiday mode can also be set for all rooms together. The °CALEON app uses the larger space available to display its own button for selecting all rooms.
Solution 1: Use interface mode to hide the entire menu 1. Set interface mode to „Hide“. Menu → Expert → Settings → Interface mode” 2. To return to „full“ mode, press and hold the upper right corner of the display for 5 seconds Solution 2: Menu lock to hide all expert functions 1. Activate menu lock Menu → Expert → Menu lock” 2. Deactivate menu lock by entering the selected password or [CALEON] Menu → Expert → Menu lock” Solution 3: Deactivate Room Sync to hide rooms of other °CALEONs Deactivate room synchronisation on all °CALEONs which should not show rooms of other °CALEONs in the same network Menu → Expert → Settings → Room Sync
1. Download °CALEON App to your mobile device. Currently available on Google Play (Android) and Apple App Store (iOS) 2. Start app and create account 3. Click activation link in your e-mail inbox 4. Connect °CALEON with the WLAN network: Expert > Settings > WiFi > Choose Network 5. Add selected e-mail address to access list: Expert > Settings > WiFi > Access Control 6. Log in to °CALEON app with e-mail and password 7. Enter device address in °CALEON app. The device address can be found in the device: Expert > Settings > WiFi > Wifi Status Done!
1. Menu | Expert | Service values | Firmware 2. Wait till download is completed Done! °CALEON automatically detects if the newest software is already installed. Firmware for other SOREL controllers which are connected to °CALEON Smart can also be updated in this way! Look for the corresponding item in the Expert menu (for example “°CALEONbox Firmware”) and proceed as shown in this video.