°CALEONbox Clima

Universal system and individual room controller for surface heating and cooling systems in combination with up to 8 °CALEON Clima room controllers. The continuous dew point control in each room ensures safe and efficient cooling operation.

CALEONbox

Inputs

Outputs

Connectivity

Find the right components for controlling your underfloor heating and cooling system with °CALEONbox Clima here.

°CALEONbox Clima
Temperature control classVIII / 5%
Power supply230VAC
Internal operating voltages24VDC, 5VDC, 3.3VDC
Relay outputs 230VAC on/off9
Relay outputs potential-free with switch contact2
0-10V or PWM outputs3
24VDC voltage output for external devices✓ max. 6W
LEDs for operating conditions14
Temperature sensor inputs *1up to 20
Grundfos VFS Sensor input *4
Compatible room controllers *3up to 8 °CALEON or °CALEON Clima
Digital interface *22xCAN + 1-Wire
Heating pump *5230VAC on/off or PWM
Heating mixer *60-10V or PWM
Heating zones and actuators *78 x 3
Heat request *8
Fan coil function via 0-10V/PWM
Heating/cooling switching *8
Cooling request *8
Dehumidifiers *9
Heating operating times per day *108 per zone
Comfort function for rapid heating *10✓ for each zone
Energy-saving heating mode Eco *10✓ for each zone
Cooling times per day *108 per zone
Comfort function for rapid cooling *10✓ for each zone
Energie-saving cooling mode Eco *10✓ for each zone
Internet access via SOREL Connect *11
Dew point calculation *12
Holiday programme
PID control for constant room temperature
Frost protection function
Circulation pump operation

*1 by 1-wire bus up to 20 sensors. Additional temperature sensors by CAN network
*2 Two separate CAN networks, 1x private (appartment), 1x heating system (building)
*3 up to 8 °CALEON can be supplied with 24VDC by °CALEONbox. When connecting more °CALEONs, an additional power supply is required. Alternatively, an external 230VAC thermostat can be operated for each zone.
*4 for measuring tap temperature and flow for domestic hot water control
*5 via 230VAC relays on/off, or speed-controlled via PWM
*6 Flow temperature control is done according to room temperature, optionally weather-compensated or combination of weather-compensation with room temperature influence
*7up to 8 heating zones with up to 3x 230VAC actuators as NO or NC design also with PID control
*8 potential-free relay contact, 0-10V or PWM signal or via CAN network
*10 adjustable via °CALEON or °CALEON Clima
*11 via SOREL Data Logger (soon also via °CALEON 24VDC Smart Thermostat with Wifi)
*12 separately in every zone where °CALEON Clima is installed

Configurator for underfloor heating

Find the right components for controlling your underfloor heating and cooling system with °CALEONbox Clima here.

Start Configurator
haendlersuche

Where to buy

Find your national SOREL contact person or the nearest SOREL retailer


Find contact person